For car audio enthusiasts all over the world, there's great news, as this year arrives a number of new systems on the market that endeavour to make car audio systems even better. With more power, proximity and efficiency these babies aim to dominate the car audio scene.
New to this year's market is Alpine's PDX series – an amplifier that is made for ultimate power and sound quality, but which is ultra reliable too. The best thing about these beautifully engineered amplifiers is that they are compact. Apparently they are at least 20% smaller than prior generations and can even be stacked, allowing for more than one amp at a time in a small space.
Not only is this baby small, but is highly efficient. With a 90% efficiency rate, you will be able to channel a serious amount of power into those amps! It incorporates new technology, which acts as a thermal and voltage protector. Internal temperature controllers automatically tell your amp that it is getting over heated and will then generate smaller amounts of power until it has cooled down. This nifty device makes sure your amplifier does not overheat, but keeps the music playing whilst under normally strenuous conditions. It also can prevent shutdowns from other problems, such as when the voltage drops notably under load.
As expected, the new PDX model like many other brand new models to the market has low distortion levels, extremely low noise and a wide band width. The sound quality is without a doubt superior to its predecessors, as it produces a clear sound that is without distortion or interference.
Nor is this model hard to use or install. Even though, the PDX is engineered to be petite, it does not sacrifice its usability. All controls and connections are very easy to find and use on this nifty little number. It's also been made to be easy to install, as quick release connectors enable a quick set up and the guide is easy to follow.
There are an amazing number of new models out there, which combine the newest technologies with functionality. If interested in car audio systems, take a look at: www.caraudio4u.co.uk
About the Author
Marie Coles is a professional writer. She writes informative, yet, dynamic articles on car audio systems.
Browse 4 Channel Amp To 2 Subs Videos
2 hifi subs, 1800 watt monoblock boss onyx series amp, 400 watt ssl 4 channel amp
4 Channel Amp To 2 Subs Questions
Home Theater Q&A
$3-500 to spend on custom home audio system, call for guidance!!? I want to get the best i can near my money so i am prepared to buy the individual speakers, amp, build the boxes, etc. I have $3-500 to spend and I want to build a custom 5.1 surround nouns. I am new to this so if someone could furnish me some advice or recommend something that'd be great! I've build a custom sub for my vehicle so i have some culture. Recommending upon getting deals or buying used parts would be better because i touch I can get more for my money buying used. thankfulness
"limewire" problam? what should i do if the bars that are supposed to be green ( on the not here side corner" are red right now (well simply 1 of them is green ) and i really need to use lime lead right now, what should i do to label all the bar green otherwise saying to achieve the connection.
"Multichannel Direct" is not glorious stop nouns...is it? I just get the denon avr-1908 receiver and enjoy everything set up...but I have my ps3 hooked up beside an HDMI cable but when I use the receivers menu to display the audio input it say the input is "Multi Ch direct" and the signal is PCM, with a "fs" of 48hz. I don't regard these settings are ideal are they? Shouldn't it be Dolby Digital 5.1, or DTS, and the signal should be lpcm next to a higher hz? My option for audio on the ps3 is Linear PCM, and bitstream, i have it set as linear pcm...
100watt subwoofer on 110watt addressee? Is it okay to use a 100 watt subwoofer on a 110 watts receiver?
2 home audio subs? Can someone give me a detailed description on how i can hook up my 2 subs to my yamaha v661 reciever because when i do one singular works. there have to be different settings or something
5.1 Sound converters? A few months ago I bought a set of Logitech X-540 speakers and they work great, the only problem is I cannot do true 5.1 surround sound from them when connecting to my PS3. The problem is that the speakers just have 3 nouns connectors (green, yellow and black) as an input and the PS3 solitary outputs 5.1 sound within HDMI or Optical. Is there a cheap solution that would allow me to convert any the PS3's HDMI or Optical 5.1 sound output into the three different colored cable?
5.1 surround and laptop backing? i have my laptop connected up to my samsung 50" hd tv, and also phillips HTS3357 5.1 surround nouns, when i play a movie(on the laptop) ,(but through the tv) only the 2 backside speakers and the center speakers produce sound, is within a way to find my sub and the 2 front speakers to output full surround, thanx in advance(laptop is connected to tv using monitor cable and a 3.5mm audio cable
5.1 surround sustain? i have my laptop connected up to my samsung 50" hd tv, and also phillips HTS3357 5.1 surround nouns, when i play a movie(on the laptop) ,(but through the tv) only the 2 reverse speakers and the center speakers produce sound, is at hand a way to grasp my sub and the 2 front speakers to output full surround, thanx in finance
52" rca will not turn on smell something burning.? A couple weeks back my RCA 52" Rear projection turned past its sell-by date while I was watching it. It took me something like 10 tries to get it to come backbone on. Tonight when I tried to turn it on I heard static consequently it went rotten then put money on on (never gave a picture) and go back sour. I smelled something burning so I unplugged it and am now asking for comfort in finding out whats wrong and any theory how much to fix it.
5-speaker set-up rapid quiz!? Hey... I just graduate and due to my unemployed days I've become a tech-junkie. I be first obsessed next to enhancing the picture but now the nouns is my next target. I've spent deeply of time positioning my speakers on the room, having it to walk through the roofs and such and have finally placed it adjectives correctly. (The standard wherein the center speaker is right in front of you, the righ and not here speakers either side of the center speaker and right and gone speakers on either side of the couch) Needless to enunciate I've been enjoy it for two days until I went to question paper tone and found out that the main not here and right speakers were the ones I've positioned on my side and the supposedly other speakers are on the sides of my center. Does it thing if I wrongly positioned my speakers? I've listened to the nouns they project and so far it has be the same though but I may be missing a article since I'm a rookie on this. Its confusing because the label say "FRONT LEFT SPEAKER".
7.1 surround nouns? i have a onkyo 7.1 system and it doesnt influence HDMI on it can i buy a coaxel cord or a optical cable to get 7.1 PCM or TRUE HD on blu gleam
7.1 surround sond ,HDMI? ok i have a addressee that does 7.1 and everything but it doesnt do HDMI will this be a problem when i get blu beam ,will my receiver interpret the 7.1 hd
720p to 1080i? i have a tv next to 1080i as its ONLY HD resolution. and my ps3 games are ONLY in 720p for hd. so i be wondering if anyone knew ANYthing that could loose change a 720p signal to a 1080i signal
About component video cable.? I need to extend my xbox 360 component cable is it possible for me to use couplers and extend it beside a normal rca connected to it? Would it work? Thanks
About home theater systems? hey guys...i have a sony hd tv...however, i dont hold home theater system...i will be getting playstation 3 so i'll have dvd/blu-ray dvd player combo surrounded by playstation 3.. now i merely need the beneficiary for home theater systems...and speakers obviously...i'm thinking of getting 5.1 or 7.1 channel receiver...my cross-question is what should i look for in the beneficiary to get the best out of it....should i look for more watts, number of input output ports within the back, etc...?
About how lots hours does a projectors bulb start to bring down the brightness? I'm looking at front projectors specificly the infocus LP6500 or the Proxima DP 6500. They say the bulbs should be replaced after 1000 hours and it could finishing as long as 2000 hours. I'm not sure if the bulb slowly losses it's lumenace.
About room thermostats? a mains opetated room thermostat requires three conductors to see to enable it to operate correctly.can you connect the thermostat to an existing two core and cpc cable?
Accurian Brand Name? I need some info and feedback on this brand.
Acoustic Solutions LCD40F108P? im not much of a tv buff so can anyone tell me if this is a angelic tv or not ? much appreciated !
Acoustic Solutions LCD40F108P? im not much of a tv buff so can anyone tell me if this is a correct tv or not ? much appreciated !
Adjusting Speakers With Amp. Large Or Small? I would like to know when adjust my speakers with the amplifier,how do you know to set them to immense or small? Is it by how many watts they can feel? What is the difference in nouns?I'd like to hear more large crisp tones,I'm getting plenty of bass. I have 2 floor standing front L & R beside built-in powered sub-woofers,a center speaker,and 2 surounds.
Advice for element music system underneath 35k? I have a budget underneath 35k and would like to hold a DVD home theatre, want to use it for both music & movies. And would luv 2 hold addl features of USB port & wireless connection. But most importantly don't want to comprimise on the nouns quality. Pls counsel.
Am I at any risk to transport an amplified signal to powered speakers? This is probably a stupid question for you audio experts out in attendance... I'm replacing a Fosgate surround sound system beside a Denon AVR-1908 A/V receiver. The Fosgate didn't amplify the signal to the center, flipside or subwoofer channels. Instead, I own powered B&O 2000 rear speakers (that are high, narrow and expensive), a powered Klipsch subwoofer, and a Phase Tech center speaker that have been running stale a single-channel amp. All are wired, not wireless, speakers When I replace my current Denon amp (that ran the unpowered front speakers) and the Fosgate beside the new Denon, do I hold to worry that an amplified signal will mar the powered rear speakers or the subwoofer? I assume, too, that I'm better stale jettisoning the center speaker amplifier. Thanks for the back!
Amp to my unpowered Sub? I bought a new Home theater addressee, however my klipsch speakers have an unpowered subwoofer. Can i use an audiocourch amp 100 (http://www.amazon .com/AudioSource-Amp-100 -2-Channel-Amplifier/dp/B00026BQJ6) To plug my subwwofer into after plug the amp into my reciever? Is that how it works?
Anamorphic widscreen the more i swot up the more confused I become? I've got a DVD (collateral damage) which claims to be 1.85:1 widescreen, it is encoded organic at 720x576, so streached it should be 1066x576, here's thee thing though, most of my players read it and play it at 1024x576 (16:9) and when i looked at the crude image it have 85 pixel top/bottom black bars presently 576-85-85=406 and 720/406 = 1.77 (16:9) so now i really am confused, someone please minister to
Any angelic projector deal? I need a front close projector with a preferably full-size screen, for below 800. Any suggestions?
Any design on where on earth to puchase a replacement remote control for vaova dtr (Maplins)? Tried online remote replacement sites and universal will not get something done all operation, pls advise. Thanks
Any recommendation for a mid-range digital (data/video) projector? For personal use. I have a friend who have one and it's great--you can turn your living-room into a cinema.
Anyone enjoy a manuel for a Bell&Howell 8 mm 253 projector? I need a copy of the picture loading page. can anyone help me?
Anyone hold a upconverting DVD player? How do you similar to it? Just got a 42 inch 1080i flat blind and thinking of an upconverting DVD player. Anyone have one and how do you approaching it? How much did you pay?
Eligible for free shipping!
